Mold Remover

Description

• Applicable scenarios

• 1. Cracks are caused by the shrinkage of the cement at the joint between the window and the outdoor cement, which leads to rain entering the room from the cracks, resulting in damp, moldy and hairy around the window for a long time.

• 2. After moving into the new house, the water contained in the wall did not completely evaporate, that is, the owner brushed the latex paint, which put some water into the wall, causing some internal walls to sweat.

• 3. External wall cracks and local water seepage are also the causes of damp and hair on the inner wall.

• Fourth, the outer wall insulation is not enough, due to the temperature difference, the inner wall sweating, long hair.

• 5. When decorating the room, some of the pipes were modified to the interior walls because the metal pipes would sweat, causing the walls to become damp and moldy."

• 6. The top layer is waterproof and leaky, resulting in a damp and hairy roof.

• 7. The original waterproof layer was damaged in the renovation and leakage to the bottom, resulting in black spots and mildew on the bottom roof.

• 8. The structural parts of the building were not broken in the construction process, resulting in the phenomenon of bubbles and holes. In winter, the stored cold air forms a "cold bridge" phenomenon due to the temperature difference in the room, making the walls damp and moldy.

• Nine, due to the indoor ventilation in winter, the humidity in the air is too high, so that the wall mold.

specification

• Net content: 500m/ bottle

• Shelf life :12 months

• Main ingredients: fungicide, decomposition agent, oxidant, no formaldehyde and other toxic substances

• Storage requirements: Store in a cool and dark place